Oliver Stoner, Руководство по эксплуатации

Страница: 22 / 25

1. Turn off the machine.
2. Set the deck to a neutral position. That is, set the tilt of the deck exactly halfway. This may most
easily be measured by measuring the distance between the bottom of the springboards and the top
of the lifting brackets. When the measurement is equal on both ends of the machine, the deck is in
the neutral position.
3. Turn the machine by hand until the keyway in the eccentric shaft is in the topmost position.
4. Adjust the jam nuts until the spring is compressed to a distance of 1 3/4 inches.
5. Tighten the jam nuts.
ORDERING REPAIR PARTS
We maintain a complete card file on all machines that have been built by Oliver Manufacturing Company. All
machines are serial numbered. To insure that you receive the correct parts, we must have the serial number
of your machine. The serial number is located on a plate on the side of the air chest. (See Figure 6.) In addi-
tion, we need the model number of the machine.
When we receive orders for parts, we ship as soon as possible after receiving the order. Normally, we will
ship by the fastest, cheapest method unless otherwise specified. Incomplete or incorrect information when
ordering will cause unavoidable delays in shipping. If you have a special problem or cannot locate some of
the required information, please contact us. We will work with you to provide what you need as quickly and as
inexpensively as possible. A parts list is enclosed for your assistance.
-19-
return to index