Oliver 695, Руководство пользователя по эксплуатации и инструкция

Страница: 15 / 38

695 PROOFER
0695S20006 5-1
TROUBLESHOOTING
WARNING
TROUBLE SHOOTING OF ELECTRICAL EQUIPMENT SHOULD BE PERFORMED BY
QUALIFIED PERSONNEL ONLY. ELECTRICAL POTENTIAL IS GREAT ENOUGH TO
CAUSE INJURY OR DEATH.
WARNING
NEVER ATTEMPT TO SERVICE THIS PROOFER UNTIL IT HAS BEEN
DISCONNECTED FROM THE POWER SUPPLY. ALL ELECTRICAL WORK MUST BE
DONE BY A QUALIFIED ELECTRICIAN.
CAUTION
BEFORE WORKING ON A PROOFER WHICH HAS BEEN RECENTLY USED
ALLOW SUFFICIENT TIME FOR IT TO COOL TO PREVENT BURNS.
No Power.
•
The machine is not plugged in.
•
There is no power available at the outlet/disconnect
No Heat or Proofer Heats Slowly.
Allow several minutes for proofer to achieve desired setting. A cooled empty proofer can
be heated from room temperature to 90
°
F in five to ten minutes. If the proofer is not
meeting this specification, check the following.
•
Power switch is in off position.
•
Temperature setting too low.
•
Check fan in air duct for proper operation.
•
Check the thermostat (upper manual control) or controller (digital proofer) for proper
function.
•
Check to see if the heating element in air duct is functioning.
(continued)
Revised 8-14-03