Oliver 695, Руководство пользователя по эксплуатации и инструкция

Страница: 14 / 38

695 PROOFER
0695S20005 4-5
Beginning Operation (continued)
RH Key
A normal press of this key forces the display to show the current RH
reading.
If the RH key is held for 2 seconds, the display will show the current RH
setting . RH key,
as well as Up and Down LED’s are also lit, indicating that RH setting can be changed if
needed.
In either case, the display reverts back to its previous mode after 5 seconds of no activity.
Start and Stop keys
These keys control the various states of the unit. Pressing Start “
I ” normally starts a
Proofing cycle with the currently memorized settings (Time, Temperature, and RH).
Pressing the Stop key “
O ” cancels the current Proofing cycle if one is active. The unit
returns to Off/Standby mode.
Time
Timer information is the default view in most states. The unit displays the time left if
Proofing, or the current set time if in Off/Standby state.
Time is displayed in the standard HH:MM format. During the Proofing cycle, the time is
also displayed as HH:MM; however, in the last 10 minutes of a Proofing cycle, MM:SS are
displayed. Maximum time programmable is 11 hours and 59 minutes.
If time is set to 0:00, then it is assumed the user does not wish to use the timing functions,
and the display will default to displaying current temperature when proofing. Standby in
this case shows the current temperature too. Start button is not lit in this case either.
All other functions work normally.