11.
Careless acts:
Give the work you are doing your undivided attention. Looking around, carrying on a
conversation, and “horseplay” are careless acts that can result in serious injury.
12.
Disconnect all power sources:
Before performing any service, maintenance, adjustments or when
changing blades. A machine under repair should be RED TAGGED to show it should not be used
until the maintenance is complete.
13.
Job completion:
If the operator leaves the machine area for any reason, the tablesaw should be
turned "off" and the blade should come to a complete stop before their departure. The key should be
placed in the “off” position, removed and given to a supervisor to prevent any unauthorized use of the
tablesaw.
14.
Replacement parts:
Use only genuine Oliver Machinery factory authorized replacement parts and
accessories; otherwise the warranty and guarantee is null and void.
15.
Misuse:
Do not use this Oliver tablesaw for other than its intended use. If used for other purposes,
Oliver disclaims any real or implied warranty and holds itself harmless for any injury or damage which
may result from that use.
16.
Drugs, alcohol and medication:
Do not operate this machine while under the influence of drugs,
alcohol, or any medication.
17.
This machine is deigned
for cutting wood products only. Do not use to cut any kind of metal or
substance other then wood.
18.
Never start the saw
while a workpiece is in contact with the blade.
19.
Raise or lower the blade
only when the machine has been turned “off” and the blade has come to a
complete stop.
20.
Miter Gauge and Rip Fence:
Never use the miter gauge and rip fence at the same time.
21.
Damaged Saw Blade:
Never use a damaged saw blade or one that has been dropped. Check the
saw blade for cracks or missing teeth. Do not use a cracked or dull blade or one with missing teeth.
Make sure the blade is securely locked on the arbor.
22.
Make sure
the blade is running in the proper direction. Refer to the arrow on the blade. The teeth
should be pointing down when viewing from the front of the saw.
23.
Alignment:
Check the alignment of the splitter to the blade. Also, check the alignment of the fence
to the miter slot.
24.
Health hazards:
Some dust created by power sanding, sawing, grinding, drilling and other
construction activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
•
Lead from lead-based paint.
•
Crystalline silica from bricks and cement and other masonry products.
•
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals, work in a well-ventilated area, and work with approved safety
equipment, such as those dust masks that are specifically designed to filter out microscopic particles.
Familiarize yourself with the following safety notices used in this manual:
CAUTION:
(This means that if precautions are not heeded, it may result in minor or moderate injury
and/or possible machine damage)
WARNING:
(This means that if precautions are not heeded, it could result in serious injury or possibly
even death).
4
Содержание 4035
Страница 19: ......
