Oliver 10060, Руководство пользователя

Страница: 29 / 46

10060/10061 Drill Press OLIVERMACHINERY.NET
29 |
Page
Adjust Depth Stop
1. Loosen the depth stop jam nut.
2. Lower the chuck until it reaches the desired
drill depth. Hold the chuck in place.
3. Reposition the depth stop nut so it is pushing
against the depth stop bracket.
4. Lower the jam nut against the depth stop nut
and tighten.
Changing Chuck
The chuck and the arbor can be swapped out for
another chuck that has an MT-2 tapered arbor. It
is recommended to have two people to
complete this task.
1.
Disconnect the drill press from the power
source!!
2. Lower the chuck until the outer drift key slot
is exposed on the side of the quill, then hold
the quill in place.
3. Rotate the spindle until the inner drift key
slot is also exposed and the arbor is visible.
4. Insert the drift key into the slot, and tap the
key with a rubber mallet until the arbor
dislodges from the quill. Get some help to
support the chuck to prevent damages.