oliser MS Soho, Руководство пользователя

Страница: 16 / 20

To Order Call: +90 312 417 72 75 / oliser@oliser.com.tr
Remove the ventilation plugs (screws) by pushing them
through the cartridge outside casing. (You may achieve this,
through a multitude of methods, however Oliser makes its
own special tool for ease of use: MS-PLUG PUSHER. We rec -
ommend this method)
Before going further, we recommend that the cartridge be
drained. The best manual method is to use paper towel. First
steam cartridge nozzles, with Oliser MS-STEAM, then place
cartridge in upright position (propped up against a wall or
other object so cartridge is in vertical position). This may
take time (maybe even overnight).
Oliser we will not be in a full position to advise you on best
to do this if the client is waiting for the said refill in your
storefront. If you know this will cause a bottleneck in your
business, then you will have to invest in the Oliser MS-CEN -
TRIFUGE, which can evacuate all old ink within seconds.
HP 23-25-41-78 Filling Process
The mixing of aftermarket inks with original inks is not advised.
The main reason is that homogenization between the two types
may not occur, and as such inhibit ink flow at a later stage.
Oliser has spent thousands of hours in R&D on inkflow and ink
formulae, and as such advises the use of its inks. In the case of
6578 cartridges our inks are very good and homogenization is
more likely than with using many other inks on the market.
The empty weights of the large profile cartridges is as follows:
- C6578 (92g); 1823 (94~98g); 6625 (92g); 51641 (92g)
CENTRIFUGE USAGE