Olimpia splendid PHENIX E, Инструкция по эксплуатации и техническому обслуживанию

Страница: 83 / 312

PHENIX E INVERTER
ENGLISH
EN - 27
3.3 - FUNCTION INDICATOR ON INDOOR UNIT DISPLAY PANEL
(fig. K2)
the display panel shows the current setting temperature
and function code enable/disable when the air conditioner
is in operation.
in “fan” and “Dehumidification” mode, the room
temperature is displayed.
in the case of a fault, displays the error code.
3.3.1 - Function Codes
light for 3 seconds when:
- timer on is set
- SWinG, tUrBo or SilenCe features are enabled
light for 3 seconds when:
- timer off is set
- SWinG, tUrBo, or SilenCe features are disabled
lights up when the function that controls hot air in Heating mode is automatically activated.
lights up when the air conditioner starts defrosting automatically.
lights up when Sel Clean function is enabled
lights up when froSt ProteCtion function is enabled
lights up when WireleSS function is enabled
3.4 - DESCRIPTION OF REMOTE CONTROL
(fig. 33)
the remote control is the interface between the air-conditioner and the customer, so it is very important to
learn all its functions, the use of the various controls and the meaning of the symbols marked on it.
3.4.1 - Indicators on remote controller (fig. 33)
A. Settings
K
2
a1. “
Breeze Away
” mode active
a2. “
Active Clean
” mode active
a3. “
Air purification
” mode active
a4. “
Sleep
” mode active
a5. “
Follow me
” mode active
a6. “
AP
” mode active
a7. remote controller battery icon (when the
battery of the remote controller runs out,
the icon starts flashing)
B. Operating mode
Displays the operating mode active.
it includes: AUTO , COOL , DRY , HEAT , FAN ONLY and return to AUTO .
C. Transmission
this transmission indicator lights when remote controller transmits signals to the indoor unit.