Olimpia splendid NEXYA S5 E CASSETTE, Инструкция по эксплуатации и техническому обслуживанию

Страница: 92 / 380

K
2
ENGLISH
EN - 36
• If the remote control is not used for several weeks or longer, remove the batteries.
Any leaks from the batteries could damage the remote control.
• The average life-span of the batteries, with normal use, is approx. six months. Replace the batteries when
the indoor unit command receipt “beep” can no longer be heard, or if the transmission indicator on the
remote control does not switch on.
Do not re-charge or disassemble the batteries. Do not throw the batteries into the
fire. They can burn and explode.
If the battery liquid falls onto the skin or clothes, wash well with clean water. Do
not use the remote control with batteries that have leaked. The chemical products
contained in the batteries can cause burns or other risks to health.
8.1.3 - Location of the remote controller
•
Keep the remote control in a position from which the signal can reach the indoor unit receiver (max.
distance approx. 8 metres - with the batteries charged) (figure 32).
The presence of obstacles (furniture, curtains, walls, etc.) between the remote control and indoor unit,
reduces the capacity of the remote control.
8.2 - FUNCTION INDICATOR ON INDOOR UNIT DISPLAY PANEL
(fig. K2)
The display panel shows the current setting temperature
and function code enable/disable when the air conditioner
is in operation.
In “Fan” and “Dehumidification” mode, the room
temperature is displayed.
In the case of a fault, displays the error code.
8.2.1 - Function Codes
Light for 3 seconds when:
- TIMER ON is set
- SWING, TURBO or SILENCE features are
enabled
Light for 3 seconds when:
- TIMER OFF is set
- SWING, TURBO, or SILENCE features are disabled
Lights up when the function that controls hot air in Heating mode is automatically activated.
Lights up when the air conditioner starts defrosting automatically.
Lights up when SEL CLEAN function is enabled
Lights up when FROST PROTECTION function is enabled
Lights up when WIRELESS function is enabled (if available in this model)
8.3 - DESCRIPTION OF REMOTE CONTROL
The remote control is the interface between the air-conditioner and the customer, so it is very important to
learn all its functions, the use of the various controls and the meaning of the symbols marked on it.