Olimpia splendid maeStro Pro, Инструкция по эксплуатации и техническому обслуживанию

Страница: 43 / 47

MAESTRO PRO INVERTER
ENGLISH
EN - 29
These operations must be carried out by skilled technicians on a regular basis that will depend on the place
of installation and intensity of use.
Depending on the quantity of dirt, the unit can be cleaned dry (by using a battery compressor and bowl
and cleaning the fins with a soft brush taking care not to deform them) or more thoroughly using dedicated
detergents.
Before you leave the site of installation you should gather up all packing material and use a damp cloth to
remove any traces of dust that may have deposited on the machine during assembly (fig. 24).
These operations, though certainly not essential, have a beneficial effect as they enhance the professional
image of the installer in the eyes of the client.
To prevent unnecessary calls by the user, before you leave the site of installation
• it is also a good idea to:
• Explain the contents of the Instruction Manual to the user.
• Show the user how to clean the filter.
4.2.2 - Condensation water drainage in case of emergency
Should anomalies of the condensation water disposal system occur, the air conditioner stops and reports the
alarm code 20 on the front panel display of the machine.
To enable the air conditioner to work temporarily until the service personnel arrive, you can drain the water
out by following these simple instructions (fig. 45):
Before proceeding with any maintenance and cleaning, always make sure the
system has been switched off, using the remote control, and the power supply plug
has been disconnected from the system socket (or the upstream master isolating
switch is positioned at “0” OFF).
a. Open the door (6) underneath the unit.
b. Remove the cap (6a) after having placed a good-sized container underneath it (at least 5-liter capacity/1,3
gal) to collect the water.
c. After having cleared the fault, the service personnel will close the evacuation pipe.
4.3 - DIAGNOSIS, ALARMS AND INCONVENIENCES
4.3.1 - Diagnosis of the inconveniences
It is important for the User to distinguish between functional problems and anomalies in relation to the be-
haviour of the appliance as foreseen for its normal operation. Furthermore, the most common problems may
easily be solved through simple operations on behalf of the User (See paragraph: Anomalies and solutions).
For all the other reports (see paragraph: 4.3.3 - Console alarms), it is necessary to
always contact the technical assistance service”
Any attempt to repair the appliance by unauthorised personnel will immediately
invalidate any form of guarantee.