38
9 DISASSEMBLY OF COMPONENTS
a
WARNING
RISK OF ELECTROCUTION
Before carrying out any maintenance or cleaning,
disconnect the appliance from the power supply.
Failure to follow these instructions can result in
electric shock, serious injury or death
.
a
WARNING
HIGH PRESSURE DANGER
The refrigeration circuit contains high pressure
coolant
and oil.
Proper safety procedures must be followed and
appropriate protective equipment worn when
working with refrigerants.
Failure to follow these instructions can result in
serious injury or death
.
a
ATTENTION
DANGER OF BURNING
Proper safety procedures must be followed and
suitable protective equipment be worn when
working with a flame.
Failure to follow these instructions can result in
moderate or severe injury
.
a
ATTENTION
DANGER OF FREEZING
Proper safety procedures must be followed and
appropriate protective equipment worn when
working with refrigerants.
Failure to follow these instructions can result in
moderate or severe injury.
a
WARNING
DANGER OF EXPLOSION
The use of nitrogen requires a pressure regulator.
Proper safety procedures must be followed and
appropriate protective equipment worn.
Failure to follow these instructions can result in
serious injury or death
.
NOTICE
DANGER OF FIRE
The use of flame requires extreme caution. Follow all
recommended safety precautions and protect surrounding
areas with fireproof materials. Keep a fire extinguisher handy.
Failure to observe this warning could cause moderate to
severe damage.
a
WARNING
MOVING PARTS
DANGER OF CUT
–
It is forbidden to operate the unit if it is out of
order or with the front grid removed.
–
It is forbidden to put your hands within the
radius of action of the fan
.
Failure to follow these instructions can result in
serious injury
.
a
WARNING
DANGER OF MOVING PARTS
Reposition all panels before putting the appliance
into operation.
Failure to follow these instructions can result in
serious personal injury or death and product
damage
.
a
WARNING
Component maintenance and disassembly
operations require the presence of two operators
.
NOTE: All the operations described below are graphically
represented with the device with front
coolant
charge and are
also valid for the device with rear
coolant
charge.
If there is a need to operate differently, the operations to be
carried out for both devices are graphically represented
.
