WALL MOUNTING ELECTRIC INSECTICIDES WITH GLUE TRAP
HACCP Certification
The above products are designed based on Hazard Analysis
Critical Control Points (HACCP),
in order
to be
appropriate
for placement
in storage
space
, processing and
food
distribution.
They have a special adhesive surface that prevents
scattering
of trapped insects, as well as lamps
with a special
film
that does not
shattered
in
case
the trap
fall
s.
ΙΝ
GENERAL
Electric insecticides are used to exterminate various insects.
They use special fluorescent tubes
RT-
52/HACCP and RT-62/HACCP are produced according to
HACCP regulations .One glue trap is included in the
packaging of the electric insecticide.
/HACCP
18
220-240VAC.
/HACCP
36
220-240VAC.
Spare Parts- Replacements
- Á1066.
A package that contains 6
replacement glue traps for RT
52/HACCP and RT-62/HACCP.
- Á1068.
A package that contains 12
replacement glue traps suitable for
RT-52/HACCP and RT-62/HACCP.
- A1056
.
External metallic protection grid.
(
1 for
RT-52/HACCP
and
2 for
RT-62/HACCP)
(Black Light) to attract the
insects from a distance. They can be used in any areas
where there are many insects. A special glue trap within the
insecticide in used to trap the insects. If they are placed
outdoor then a special external metallic grid is available to
protect birds that might happen to come near the trap. These
traps protect us from all kinds of insects (mosquitoes, gnats,
flies, e.t.c) without using any chemicals. The insecticides are
mounted high above the floor level and in a clearly visible
place in order to attract the insects more easily. The
RT-52
.
This model uses a special glue trap for
insects and incorporates two
2 x
W special fluorescent tubes (blacklight) placed in the
front of the glue trap. The device is powered by a voltage of
RT-60
.
This model uses a special glue trap for
insects and incorporates two
2 x
W special fluorescent tubes (blacklight) placed in the
front of the glue trap. The device is powered by a voltage of
925062000_09_006
RT-52/HACCP
RT-
6
2/HACCP
TECHNICAL CHARACTERISTICS
OPERATION TEMPERATURE RANGE
RELATIVE HUMIDITY
CONSTRUCTION MATERIALS
DIMENSIONS
TYPICAL WEIGHT
GUARANTEE
OPERATION VOLTAGE
CONSUMPTION
DEGREES OF COVER PROTECTION
PRODUCED IN ACCORDANCE WITH
LAMPS
220-240V AC/50-60Hz
IP 20
2x
18
W
2x
36
W
147
VA
167
VA
EN 60335-1, EN 60335-2-59
0 to 60 C
o
Up to 95%
Aluminum
,
ABS self extinguished
2 years
(
1 year for the lamp
)
8360kgr.
5780kgr.
68
x 40 x 10 mm
127
x 40 x 10 mm
Changing the lamp
If the lamp must be changed then follow the procedure bellow:
1. Remove the power plug from the wall
outlet.
2. Replace the lamp which is not operating,
with a suitable type.
3. Insert the power plug into the wall outlet.
The lamp type used are :
SYLVANIA
type
T12 F
18
W/BL350S
for
RT-52/HACCP
and
T8 F36W / BL368FEP
for
RT-62/HACCP.
Maintenance
The glue must be replaced once a month for maximum
efficiency of the insect trap.
In periods where high quantities of insects are observed or if
the insect trap has been installed in areas with high levels of
dust then the glue trap must be checked more frequently. If the
surface of the glue is covered with dust or insects then it must
be replaced.
Page
1 from
2
Thank you for your trust in our products
Olympia Electronics - European manufacturer
