OLIMEX© 2014
STM32-P407 user's manual
3.3V_MCU_EN
When closed enables the power supply on the STM32F207ZET.
Default state is closed.
TX_BOOT_E
If closed separates USART6_TX and PC10.
Default state is open.
RX_BOOT_E
If closed separates USART6_RX and PC11.
Default state is open.
3.3V_E
Board's digital power supply is disabled if open.
Enabled if closed.
Default state is open.
AGND_E
Analog GND is disabled if open.
If closed Analog GND is enabled.
Default state is closed.
R-T
RST and TRST are separated if open.
RST and TRST are connected if closed.
Refer to the schematic near the JTAG connector for how this jumper influences the JTAG
programming of the board.
Default state is open.
CAN_T
Can termination is disabled if open.
Default state is open.
Page 22 of 32
