OLIMEX MSP430-CCRF, Руководство пользователя

Страница: 9 / 16

JUMPER DESCRIPTION:
J1
This jumper, when is in position 1-2 – UEXT pin 3 (signal TX) is connected to
CC430F5137IRGZ pin 5 (signal BSLTX/UCA0TXD); when the jumper is in position 2-
3 - UEXT pin 3 (signal TX) is connected to CC430F5137IRGZ pin 6 (signal
BSLRX/UCA0RXD)
Default state is shorted in position 2-3.
J2
This jumper, when is in position 1-2 – UEXT pin 4 (signal RX) is connected to
CC430F5137IRGZ pin 6 (signal BSLRX/UCA0RXD); when the jumper is in position 2-
3 - UEXT pin 4 (signal RX) is connected to CC430F5137IRGZ pin 5 (signal
BSLTX/UCA0TXD)
Default state is shorted in position 2-3.
When jumpers J1 and J2 are shorted in position 1-2 – the board is configured as host and can
be used as host for some of our module boards. When these jumpers are shorted in
position 2-3 – the board is configured as device and can be used as module board.
INPUT/OUTPUT:
Status Led with name LED (red) connected to CC430F5137IRGZ pin 13
(P1.0/PM_RFGDO0).
User button
with name
BUT
connected to
CC430F5137IRGZ
pin 12
(P1.1/PM_RFGDO2).
Page 9