Biostar M7SXF Скачать руководство пользователя | Manualshive

Страница: 1 / 73

background image

M7SXF/H

Federal Communications Commission
(F.C.C) Statement

This device complies with Part 15 of the FCC Rules. Operation of this device is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

  Accessories: This device has been tested and found to comply with the limits of a
Class B digital device; the accessories associated with this equipment are as
follows:
    1. Shielded serial cable. (Can be obtained from multiple retail outlets)
    2. Shielded printer cable. (Can be obtained from multiple retail outlets)
    3. Shielded video cable. (Can be obtained from multiple retail outlets)
    4. Shielded power cord. (Provided by manufacturer)
    These accessories are required to ensure compliance with FCC Rules. It is the
responsibility of the user to provide and use these accessories properly.

  This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant of Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and radiates radio frequency energy
and, if you did not installed and used in accordance with the instructions, may cause
harmful interference in the radio communications. There is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference in the radio or television reception, which can be determined
by turning the equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures:
    1. Reorient / relocate the receiving antenna.
    2. Increase the separation between the equipment and the receiver.

3. Connect the equipment into an outlet from a different circuit where the

receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications that is not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.

1
2
3
...
»

Содержание M7SXF










































































Отзывы:

Нет отзывов

Похожие инструкции для M7SXF

Бренд: Silicon Laboratories Страницы: 18

Бренд: Nematron Страницы: 47

Бренд: Diamond Systems Страницы: 112

NB7NPQ1102MCMUGEVB

Бренд: onsemi Страницы: 7

Бренд: AOpen Страницы: 8

Бренд: TYAN Страницы: 47

Бренд: Texas Instruments Страницы: 11

Бренд: Lucky Star Страницы: 77

Бренд: Newport Страницы: 30

Бренд: Humandata Страницы: 8

Бренд: Supero Страницы: 80

Бренд: Zamel Страницы: 3

Бренд: ST Страницы: 11

MPG B550I GAMING EDGE WIFI

Бренд: MSI Страницы: 69

Бренд: Gigabyte Страницы: 96

BD93F10MWV-EVK-001

Бренд: Rohm Страницы: 20

P67 PROFESSIONAL

Бренд: ASROCK Страницы: 9

Бренд: Supermicro Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды