Olicom CrossFire 8730 Скачать руководство пользователя страница 86

Страница: 86 / 234

CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1

Switch Configuration

Port Configuration Screen

To open this screen do the following:

1. Starting from the main menu, select Configuration

→

Port Configuration.

2. You will be prompted for a port number. Token-Ring ports are 1-20, Fast

Ethernet ports are 21, 22, 25, or 26. When you have entered the port number, the
Port Configuration screen for that port will be displayed.

Token-Ring Port Configuration

The Token-Ring ports are between 1 and 20. For these ports you will see the
following screen:

➽

Note: When auto is selected for fields that support the auto option, the current
operational field value shown will be prefixed with A-.

Name

This field is for assigning a name to the Token-Ring port.

TrBRF

This field is for informational purposes only, and shows the parent TrBRF of the
TrCRF that the port is assigned to.

TrCRF

This field is for informational purposes only, and shows the TrCRF that the port is
assigned to.

Содержание CrossFire 8730











































































































































































































































Результаты поиска

Содержание CrossFire 8730

Отзывы:

Olicom CrossFire 8730, Справочное руководство, Страница: 86 / 234

Результаты поиска

Содержание CrossFire 8730

Отзывы: