Olicom CrossFire 8730, Справочное руководство

Страница: 210 / 234

196
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1 Monitoring Port Traffic
Switched Port Analyzer Screen
To open this screen from the main menu, select Configuration
→
Switched Port
Analyzer.
On this screen you can configure a Switched Port Analyzer port. The following
information is displayed:
Port Number
Port to which the network analyzer or RMON probe will be attached.
➽
Note: This port should be assigned to its own TrCRF. For information about
assigning ports to a TrCRF, see “VLAN Configuration” on page 52.
Port To Monitor
The port that will be monitored.
To change the current settings, select the appropriate parameter and specify a new
value. To disable the Switched Port Analyzer port, select Port to Monitor and
specify 0 as its value. Save the changes by selecting Return.
➽
Note: It is only possible to monitor ports within a physical switch, and not in a
stack.
❏