Olicom CrossFire 8730 Скачать руководство пользователя страница 119

Страница: 119 / 234

105

CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1

Switch Configuration

— Any packet with the specified destination address is blocked at the

specified port(s).

•

Allow any packet with Source Address—Allow Src

— If a packet is received from a specific address it is allowed to go to the

specified port(s). This feature is used in conjunction with port security.

•

Allow any packet with Destination Address—Allow Dest

— If a packet is sent to a specific address, it is allowed to go to the specified

port(s). This feature is used in conjunction with port security.

•

Allow any packet with Limited Multicast Address to ports(s)—Allow Lma

— If a packet is sent to the specific multicast address, it is allowed to go to

the specified port(s) only.

•

Force a packet with the Destination Address to certain port—Force Dest

— When a packet with a specific address must go to a specified port.

➽

Note: Force a packet is for test in network or troubleshooting only. Must not be
combined with Port Security Filter.

Applied Ports

The input port(s) that this filter entry is applied to (for that specified MAC address).

Exit Ports

The specified port(s) where a packet is allowed to go, or forced to go (for that
specific MAC address). This applies only to the Allow lma and Force Dest filters.

Содержание CrossFire 8730











































































































































































































































Результаты поиска

Содержание CrossFire 8730

Отзывы:

Похожие инструкции для CrossFire 8730

Бренды по названию

Популярные бренды

Olicom CrossFire 8730, Справочное руководство

Результаты поиска

Содержание CrossFire 8730

Отзывы:

Похожие инструкции для CrossFire 8730

Бренды по названию

Популярные бренды