Technical Sheet
Happy Air PLUS
FTC.1296.00
Technical Sheet
Page 6
www.oli-world.com
Millimetres measures
This product is artistically made in conformity to applicable CEE rules and is manufactured to allow rooms
and similar air change, wherever the product is installed. Please follow all these indication to ensure
performance, mechanical and electrical reliability and keep always this instruction leaflet. Do not use this
product for different application unless indicated by us.
1-Remove packing and make sure that the appliance is undamaged.
2-Check that your electrical voltage and frequency correspond to those marked on the fan rating label.
3-This appliance must only be used for the purpose it was built for, i.e. air replacement for domestic and similar
purposes.
4-Do not operate the appliance in the presence of inflammable vapours (alcohol, petrol, etc.).
5-Before carrying out any cleaning or maintenance disconnect the mains electrical supply to the fan by means of a
double pole switch or remove the plug. Any maintenance and cleaning operation that requires dismounting the unit
must only be done by someone who is a property qualified person.
6-Make sure you have completely assembled the product before running.
7-Periodically, at least once a year or more frequently in case of heavy use, remove dirt and incrustation from the
impeller and motor casing and, if necessary, clean or replace the filter. It is also very important to make sure the
impeller is not deformed or cracked, is able to rotate freely and without oscillation, and is properly fixed to the
shaft.
8-When the appliance is out of use, remove the power lead. Moreover, make potentially dangerous parts
harmless, especially with regard to children who might play with appliance when it is not in use.
9-
Installation must be carried out by qualified personnel according to manufacturer’s instructions. Incorrect
installation can cause damage to people, animals or properties for which the manufacturer cannot be considered
liable.
10-The fan is a fixed appliance and the main supply must be done by flexible cable with plug or by a onnipolar
switch with a minimum opening of the contacts of 3 mm.
11-When installing the fan in a room containing a combustion heater ensure that there is sufficient air to supply
both appliances.This is to ensure the efficient operation of the heater and to allow a proper operation of the fan.
The fan must discharge into a single fume pipe or directly outside.
12-This appliance can be used by children aged from 8 years and above and persons with reduced physical
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not be made by children without supervision