H301-MIZAR-TILT
User Manual
REV 02
www.oko-lab.com
Pa
ge
9
7.
Working with 1
”x3’’ chamber slide
The
1”x3” chamber slide
fits into the Chamber Base and it is held in place by the magnetic clamps in order to prevent
movement inside the opening on the base. To insert the
1”x3” chamber slide
, follow the steps shown in Figure 10 and
listed below:
1.
Insert the
1”x3” chamber slide
into the Chamber Base (see image 1 in Figure 10).
2.
Place the magnetic clamps over the
1”x3” chamber slide
(see image 2 in Figure 10), then push down the head of
the clamps simultaneously and move it in the direction shown in the image 3 of Figure 10.
3.
Insert the Light Trap into the Chamber Base as shown in image 4 in Figure 10.
4.
Close the Chamber Base with the Lid (see image 5 and 6 in Figure 10).
Figure 9. Base Top view.
