OKM Future Series, Руководство пользователя

Страница: 41 / 64

Operating modes 41
7.1 Ground Scan
The operating mode "Ground Scan" allows a graphical measurement of any area for analysis on a
computer.
General information about conducting a geophysical measurement can be read in chapter 8 “Field
procedure” on page 57.
7.1.1 Prepare a Ground Scan
Before starting the actual measurement, you have to adjust three essential parameters. These settings
are necessary to define the field size and how to step out the area to record measuring values. This and
the next subsections will explain these parameters in more detail.
Step 1
Power on the device and select the operating mode "Ground
Scan" from the main menu. If there is no probe connected the
button is disabled.
Step 2
If the Super Sensor is connected, please confirm the operating
mode "Ground Scan" by pushing the
OK
button.
Step 3 - Impulse Mode
The impulse mode sets the way of how the single impulses
(measure values) will be released by the metal detector. There
are two impulse modes available:
• Automatic
Each measure value will be recorded automatically and
continuously without any break.
• Manual
One measure value will only be recorded after you have
pressed the start button of the control unit or Super
Sensor.
OKM GmbH
www.okmmetaldetectors.com