manualshive.com logo in svg
background image

Model #LSS Instrucon Manual 

Dear Valued Customer, 

Although  extreme  care  goes  into  manufac-

turing and packing of this package, mistakes 

are  possible.  If  you  encounter  any  missing 

parts  or  difficulty  in  assembly,  etc.  please 

call our toll free customer service line at 1-

800-261-4112 for courteous and immediate 

resolu'on to your problem. 

 

Sincerely  

 

Oklahoma Sound 

Manufactures Warranty

 

Our  lecterns  undergo  the  most  rigid  and  exacng  test  for  superior 

quality  and performance before leaving our factory. Oklahoma Sound 

warrants  this  product  to  be  free  from  defecve  material  and  work-

manship  on  this  unit  for  five  years  from  the  date  of  resale  by  an  au-

thorized  Oklahoma  Sound  distributor.  Oklahoma  Sound  will  replace 

defecve parts and repair malfunconing products under this warran-

ty when the defect occurs under normal installaon and use, provided 

that the unit is returned to our factory via prepaid transportaon a(er 

direct authorizaon and approval form Oklahoma Sound. This warran-

ty provides that examinaon of the returned product must disclose in 

our judgment a manufacturing defect. This warranty does not extend 

to  any  product  which  has  been  subject  to  misuse,  neglect,  accident, 

improper installaon or where the serial number has been removed if 

defecve  and  is  given  in  lieu  of  any  other  warranty  implied  or  ex-

pressed and will not cover any damage.    

Содержание LSS









Отзывы: