OKIDATA OL600e, Руководство по обслуживанию

Страница: 54 / 246

Page: 28
Service Guide OL600e/610e/610ePS
Chapter 2 Operation Description
2.6 Cover Open
When the stacker cover is opened, the cover open microswitch on the power/sensor board is turned off to
cut +5V supply to the high voltage power supply circuit. This results in the interruption of all high-voltage
outputs. At the same time, the CVOPN signal is sent to the control board to notify that the microswitch is
off, and the control board carries out the cover open process.
Paper Feed Check List
Type of error Monitor Standard value
Error
Plus Minus
Paper feed error Hopping start
to
In sensor on 72.0 36.0 _
Paper feed jam In sensor on
to
Write sensor on 20.0 20.0 _
Paper feed jam Write sensor on
to
Out sensor on 140.5 25.0 _
Paper size error In sensor on
to
Out sensor on Depends on the
paper length 45.0 45.0
Paper exit jam Out sensor on
to
Out sensor off Depends on the
paper length 45.0 45.0
Paper feed jam In sensor off
to
Write sensor off 22.2 22.0 _
Note: Hyphen ["-"] in the table indicates that no check is done.
Paper Length List
Type Paper length Check
range
Min. Max.