OKIDATA OF2600, Руководство по обслуживанию

Страница: 172 / 410

44 Redial Interval Switches the redial interval to meet the
installed country's regulations. Settings: 0 to
15 minutes (one minute increments). 3 min.
45 Timeout Timer Defines the interval between completion of
dialing and the start of TX or polling RX
communication AND the line hold time for a
telephone call in ON-HOOK. Settings: 20 to
90 seconds (one second increments). 59 sec.
46 Parameters for One
Touch or Auto Dial
Keys Selects the One Touch Keys or the Auto Dial
Keys. Assigns the following features to each
One Touch Key and each Auto Dial Key. (a)
Starting Modem Rate <_><_>Settings: 14.4
9.6 or 4.8 kbps (b) Ignoring the 1st DIS.
<_><_>ON: 1st DIS ignored. <_><_>OFF:
1st DIS is not ignored. (c) Protective Tone (d)
MH Only <_><_>ON: Coding scheme is MH
only. <_><_>OFF: Either MH MR or MMR 14.4 kbps
OFF OFF
OFF
47 Department ID This function can restrict operation to only
authorized users. It can also record user /
department identifiers. Settings: OFF ON
Restrict Access ON Restrict Access OFF.
When Department ID is ON and Restrict
Access is ON unit operation is restricted to
authorized users. Users must enter a
pre-registered code to operate the unit.
Twenty-four codes (01 to 24) can be entered.
Each code is a four digit number (0000 to
9999). The twenty-four digit codes and their
four digit numbers appear on the Activity
Report. NOTE: Service technicians can enter
"****' from the operator panel (when the
Department ID and Restrict Access are set to
ON) to access unit functions. OFF
48 Message Save Days Selects the period for keeping received
messages in the memory. When set to OFF
messages are retained in memory indefinitely.
Settings: OFF 10 20 or 30 days 20 days
49 Time Out Message Settings: ERASE or PRINT. After being held
in memory for the interval specified by
Technical Function 48 one of the following will
occur. ERASE: Messages erased without
printing. PRINT: Messages print and then
are erased. PRINT
50 Remote Diagnosis Enables (ON) or disables (OFF) the remote
diagnosis function. OFF
51 Power Save Mode Enables (ON) or disables (OFF) the power
save mode. OFF