OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Receive the shipment and set up the Printer in the final position
3-21
3.4.9
Attach the document table (Multifunction Printer Model only)
1
Required tools
2
Remove the document table from
the box.
Phillips screwdriver (#2) x1
- Between 150 mm (5.91 inches) and
210 mm (8.27 inches) in length
(180 mm (7.09 inches)
recommended)
-
Magnetic
210 mm
(8.27 inches)
Two brackets are installed on the document table
(one on each side) when the Printer is supplied.
They are used to keep the document table at the
right angle.
After the document table has been installed, these
brackets should be removed as they are not
required anymore. However, do not dispose of
them as they may be used the next time you move
the Printer.
The following seven screws are supplied with the document
table.
- Five hexagon plus socket head TP machine screws
- Two plus socket head machine screws