OKI Data Infotech Corporation CONFIDENTIAL
3-1
Chapter 3
Receive the shipment and set up the
Printer in the final position
Install the Printer delivered from the factory following the procedure below.
(1) Move the Printer to the unpacking location
(2) Remove the crate packaging
(3) Assemble the Printer
(4) Move to the final position
(5) Hardware installation
Cautions
Sudden changes in temperature cause condensation inside the Printer and damage it. When the
temperature differs largely between the installation position and the outside, e.g., in the winter, do
not immediately open the packaging. Instead, perform the following procedures to acclimate the
Printer to the ambient temperature.
1. For approximately one hour, leave the Printer in a location where the temperature is between the
installation location temperature and outdoor temperature.
2. Before starting hardware installation, leave the Printer in a location that has around the same
temperature as the installation location for two hours or more.