Oki proColor pro900DP, Руководство пользователя

Страница: 17 / 18

______________________________________________________________________________________
Pro900DP Set-Up and Print Overview
16
4.0
Troubleshooting Feed / Print Issues
Detailed Troubleshooting is provided in the Feeder/Conveyor Product Guide.
The following are provided as quick reference for initial set-up and print (does
not include troubleshooting for conditions resulting from wear on the feeder
(example, belt wear)
Problem Cause Solution
Double Feed
Gate assembly is set too high
Wedge positioned too far back
Media interlocking (ex. envelope
flaps)
Static build-up in media
Worn ‘O’ rings
Lower gate slightly (1/4 turn at a time)
Move forward slightly so that back edge of
lower sheets are just resting on the wedge
Re-shingle the media. Ensure there is no
nesting.
Fan and re-shingle the media.
Advance ‘O’ rings (see Product Guide)
Media Jams Improper adjustment in one
or more of the following:
- gate adjusted too low
- feeder side guides too tight
- wedge adjusted too far
forward
- discharge side guides too
Tightly adjusted
Belts moving, but media not
feeding
- too much weight in hopper
- media binding (side guides)
- stack of media too light (no
downward pressure on stack)
- gate adjusted too low
Turn power knob to ‘O’ (OFF)
Remove jammed media
Review set-up in detail (Product Guide)
Media Skewing Wedge not properly adjusted
for the media
Excessive gate pressure on
one side
Re-align wedge position (refer to Product
Guide). Ensure wedge is evenly placed
along back edge of media.
See Product Guide for adjustment of gate
Damage to Media Gate adjusted too low
Media binding in side guides
or in hopper
Re-set gate by removing media and re-
checking with a single sheet.
Re-adjust side guides using 2” stack of
media