Oki OKIPAGE 14i, Руководство по обслуживанию

Страница: 166 / 376

Paper Feeder option cover
was opened. error display.
- Check the connection between
the main control board and
TQSB-2-PCB.
- Replace the main control board
TQSB-2-PCB or connector.
Jam errors A jam occurred during paper
hopping from the tray.
tray: TRAY1, TRAY2,
FEEDER, MANUAL
- Check the paper in the cassette.
Open and then close the cover.
When the cover is closed,
recovery printing is performed and
the error display is released.
- If this error occurs frequently,
see Section 6.5.2(2)-1.
Jam errors A jam occurred during paper
feeding after completion of
paper hopping from the tray.
tray: TRAY1, TRAY2,
FEEDER
- Open the cover, remove the
paper, then close the cover.
When the cover is closed,
recovery printing is performed and
the error displayed is released.
- If this error occurs frequently,
see Section 6.5.2(2)-2.
Jam errors A jam occurred during paper
ejecting.
tray: TRAY1, TRAY2,
FEEDER, MANUAL
- Open the cover, remove the
paper, then close the cover.
When the cover is closed,
recovery printing is performed and
the error display is released.
- If this error occurs frequently,
see Section 6.5.2(2)-3.
Paper size error Paper of improper size is
being fed from the tray.
tray: TRAY1, TRAY2,
FEEDER
- Check the paper in the tray or
check to see if more than one
sheet of paper were being fed
simultaneously.
- Set the designated paper in the
tray.
- Open the cover, then close it to
perform recovery printing and
release the error display.
- If this error occurs frequently,
see Section 6.5.2(2)-3.
Tray paper out The tray has run out of
paper.
tray: TRAY1, TRAY2,
FEEDER
Load paper in the tray.
Size error Loading of paper indicated Load the requested paper in the