Oki OKIPAGE 14i, Руководство по обслуживанию

Страница: 371 / 376

Service Manual for OKIPAGE 14i
Chapter Product Accessory 4: Network Interface (option)
Page: 171
14) TROUBLESHOOTING
a) Basic Procedure
Processing flow after the occurrence of an error
b) Checking STATUS CODE/SUB STATUS CODE
If a communication error occurs in sending/receiving in this Network card, the LCD panel will display "HOST I/F ERROR". In this case, check the error
status in the following procedure for handling. Also, When each function does not perform, Be sure to note this code.
(SUB STATUS CODE might include values which indicate other statuses but error. )
(1) Press "Recover" button for 2 seconds or more to release the error.
(2) Press "MENU 1" button for 2 seconds or more under the OFF-LINE state to make a shift to level 2 menu setting. after that, "PRINT MODE" is
indicated.
(3) Press "MENU 1" button repeatedly until "NETWORK" is indicated and press "ENTER" button to go to Network setting mode.
(4) Press "MENU 1" button repeatedly until "MAINTENANCE" is indicated, and pressing "ENTER" button, "STATUS" will be indicated. At this time, the
figures which indicate the type of error appears in the lower part of LCD.