Oki OKIOFFICE84, Руководство по обслуживанию, Страница: 66 / 519

T.F.
No.
Item Specifications Default
40672201TH Rev. 4 2 - 22
Table 2.9.1 (3/7) Service Personnel Initial Settings
Echo Protection
Ignore 1st DIS
CED-DIS timer
Tone for echo
OFF
OFF
75 ms
OFF
ON
ON
1.5 sec
ON
(TF-11 table)
09 MDY/DMY
10 Long document SCAN
11 Tone for Echo
12 MH only
13 High-speed modem rate
14 T1 (TX), timeout value
15 T1 (RX), timeout value
Switches LCD display and report print from
month/day/year to day/month/year or vice versa.
MDY/DMY selectable.
Switches the function of transmitting long-size
document (more than 360 mm).
ON : 1500 mm or 60 min.
OFF : 360 mm or 60 min.
Note: 60 min is transmitting time.
Switches the function to apply to poor lines with
echo in overseas transmission, etc.
ON: Enables
OFF: Disables
Switches the function of limiting image compres-
sion to the MH codes only.
ON : Coding scheme is MH only. When the
receiving image data is affected by noise
on the telephone line.
OFF : Any of MH, MR and MMR.
Specifies the modem’s starting speed, 14.4k,
9.6k, or 4.8kbps.
T1 (TX) is a time to detect up to 3 flags of DIS sent
from a called fax machine.
Registers the time duration (in seconds) for
which the fax waits for the remote station’s
answer.
This timer starts when the last dialled digit has
been sent in the automatic transmission mode.
* Selects the 3 digit timer
010 to 255 sec selectable.(in one second steps)
T1 (RX), timeout value (later)
Registers the time duration (in seconds) for
which the fax waits for the remote station’s
answer of individual country’s specification. This
timer starts after the DIS is transmitted. If T1
times out, the fax disconnects the line.
* Selects the 3 digit timer
010 to 255 sec selectable. (in one second steps)