Oki OKIOFFICE84 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 519

Oki OKIOFFICE84 Скачать руководство пользователя страница 21

40672201TH Rev. 4

1 - 14

Table 1.5.1 (5/10) Basic Performance Specifications

No.

Item

Specifications

12

Copy stacking

13

Scanning resolution

14

Image scanning method

15

Contrast control

16

Recording resolution

17

Recording system

18

Skew of recording paper

19

Copy darkness

20

Copy uniformity

21

Recording paper running out

The fax can discharge printed copies and stack them faceup.
Maximum sheets on the copy stacker: 30*

Note*

:

Oki Data recommended paper

Horizontal:
• 300 dot/inch

Vertical:
Transmission mode:

• 3.85 line/mm (STD), 7.7 line/mm (FINE) or 15.4 line/mm

(EX.FINE)

COPY mode:

• 3.85 line/mm, 7.7 line/mm, 15.4 line/mm or 300 dot/
inch.

NA Letter size (2592-bit) contact image sensor

1) Automatic background sensing

A continuous document background of 0.3 OD (optical
density) or less will be transmitted as white.

2) The LIGHT and DARK contrasts will automatically be

adjusted to improve image quality.

Horizontal:

• 300 dot/inch

Vertical:

• Fixed: 3.85 line/mm (STD), 7.7 line/mm (FINE), 15.4

line/mm (EX-FINE) 300 dot/inch (EX-FINE)

Variable: Automatically adjusted to the paper length.

• 300 to 412 dot/inch
• 3.85 to 5.06 line/mm (STD)
• 7.7 to 10.13 line/mm (FINE)
• 15.4 to 20.24 line/mm (EX. FINE)

Electro-photographic printing
1) 211.3mm (2496 bit) or 216.7mm (2560 bit) LED print head

Maximum allowable skew is + or - 1 mm over an advance of
100 mm.

1) Black image:

Greater than 1.2 OD (Optical den-
sity)

2) White background: Not greater than 0.2 OD

(Optical density)

Printed copies will exhibit a uniform density of the printed and
background area:

1) From edge to edge:

25%

2) From copy to the next copy: 30%

The fax can detect the no-paper condition by a photosensor.
When the paper has run out in the local copy operation, the
scanning will stop with “PAPER OUT/JAM” on the LCD and an
ALARM LED turns on without an alarm tone.
When the paper has run out while a message is being received
and the no-paper reception is activated, the LCD display will
show “MSG. IN MEMORY”, and the ALARM LED turns on.

«
...
19
20
21
22
23
...
»

Содержание OKIOFFICE84








































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов