manualshive.com logo in svg

Oki OKIOFFICE84, Руководство по обслуживанию, Страница: 185 / 519

Поделиться
Скачать
Oki OKIOFFICE84 Скачать руководство пользователя страница 185

40672201TH  Rev. 4

6 - 26

Table 6.15.1   (1/2) Service Code List

0000

Successful end of communication.

1080

STOP key has been pressed while calling a remote fax.

10A2

Busy tone detected.

14C0

Dial tone not detected.

14C1

Line current not detected.

14C2

Calling-and-waiting for line connection time out.

14C3

Dialling limit time out.

21A0

Received signal other than DIS/DTC.

21A1

Contents of received DIS/DTC are faulty.

21A3

Each time there is no response from the receiver for sending TCF three times.

21A4

TCF fall back is not possible.

21A5

Received signal other than the desired signal in response to sending TCF.

21B0

Transmitter tried to transmit by confidential transmission function but the remote fax has not the
capability of confidential reception.

21B1

Transmitter tried to transmit by Broadcast Initiate function but the remote fax has not the
broadcast capability.

21C0

In Closed Network setting, TSI/CIG/CSI is either not received or, if received, it is not authorized
one.

21E0

Contents of CM/JM are faulty at transmission side.

21E1

Phase 2 time out at transmission side.

21E2

Phase 3 time out at transmission side.

21E3

Training time out of phase B control channel at transmission side.

29B6

In Confidential Reception, the mail box specified by transmitter is not set up and open.

29C1

In closed Network setting, TSI/CSI is either not received or, if received, it is not authorized one.

29E0

Contents of CM/JM are faulty at receive side.

29E1

Phase 2 time out at receive side.

29E2

Phase 3 time out at receive side.

29E3

Training time out of phase B control channel at receive side.

39A0

The number of continuous-error lines have exceeded the specified limit.

39A1

The number of random-error lines have exceeded the specified limit.

39B0

Memory Overflow has occurred while receiving in memory.

39B1

Memory Overflow occurred during Confidential Reception.

39C0

DECODER hardware error. (cannot reproduce picture)

Code

Description

Содержание OKIOFFICE84








































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов