Oki OF5600, Руководство по обслуживанию

Страница: 37 / 448

General Information 1 - 17 OKIFAX 5300/5600
Service Manual, P/N 59278301
Note: TF: Technical function setting
FP: Function program setting
OT: One-touch key pressed
F: SELECT FUNCTION key pressed
No. Item Specifications
19 Copy darkness
20 Copy uniformity
21 Recording paper runs out
22 Minimum scan line time for
receiving
23 Coding scheme
24 MODEM
1) High-speed MODEM
2) Low-speed MODEM
1) Black image: Greater than 1.0 OD (Optical density)
2) White background: Not greater than 0.2 OD
(Optical density)
Printed copies will exhibit a uniform density of the printed and
background area:
1) From edge to edge: 25% unit
2) From copy to the next copy: 30% unit
The fax can detect the no-paper condition by a photosensor.
When the paper has run out in the local copy operation, the
scanning will stop with “NO PAPER ... REPLACE PAPER” on the
LCD, and an ALARM LED turns on without an alarm tone.
When the paper has run out while a message is being received
and the no-paper reception is activated, the LCD display will
show “MSG. IN MEMORY”, and the ALARM LED turns on.
0 ms, when receiving from an Oki Data facsimile.
5 ms at 7.7 line/mm and 10 ms at 3.85 line/mm when receiving
from a non-Oki Data facsimile.
1) One-dimensional coding scheme:
Modified Huffman (MH)
2) Two-dimensional coding scheme:
Modified READ (MR)
Modified modified READ (MMR)
a) ITU-T Rec. V.29 (9600/7200 bps)
b) ITU-T Rec. V.27 ter (4800/2400 bps)
c) ITU-T Rec. V.17 (14400/12000/9600/7200 bps)
d) ITU-T Rec. V.33 (14400/12000 bps)
e) ITU-T Rec. V.34 (28800 bps); for OKIFAX 5500/5600
ITU-T Rec. V.21 channel 2 (300 bps)