Oki OF5300Plus, Руководство пользователя

Страница: 39 / 109

26
Installation
6 Press the Start key to save your entry.
7 Press the Select Function key to finish.
Connecting to a PBX
A PBX (Private Branch Exchange) is a private tele-
phone system used to route internal calls. If you have
to dial a prefix (access digit) to get an outside line, then
your line is connected to a PBX.
If you are connecting your OKIFAX to a PBX, follow
the instructions below. It can then detect the access
digit at the beginning of phone numbers you dial or
program, and automatically waits for a dial tone before
dialing the rest of the number.
Note: Some PBX installations may require additional adjust-
ments to your OKIFAX. If you continue to have difficulty with
fax communication after following these steps, contact
Okidata.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
3 On the numeric keypad, press 2. The display
shows 2:DIAL PARAMETER.
4 Press the Yes
§
key until the display shows
PBX LINE, [OFF].
5 Press the No
©
key. The display changes to
PBX LINE, [ON].
6 Press the Yes
§
key until the display shows
DIAL PREFIX, [OFF].
7 Press the No
©
key. The display changes to DIAL
PREFIX, [ ] ENTER 4DIGITS.
8 Using the numeric keypad, enter the number you
normally dial from your PBX to obtain an outside line—
for example,
9 before the number, such as 1-555-1212.
9 Press the 14/Space One Touch key repeatedly until the
display changes.
10 Press the Yes
§
key.
11 Press the Select Function key to finish. Keep in mind
that all of the outside telephone numbers you program
into your OKIFAX have to begin with your PBX’s access
digit.
Note: To turn off the PBX LINE and DIAL PREFIX functions,
follow Steps 1-7 above. At Step 8, press the Space key four
times. Then skip to Step 10.