manualshive.com logo in svg

Oki ML63326, Руководство пользователя, Страница: 146 / 322

Поделиться
Скачать
Oki ML63326 Скачать руководство пользователя страница 146

10-17

ML63326 User's Manual

Chapter 10  Ports (INPUT, OUTPUT, I/O PORT)

10

P93

P92

P91

P90

P9D (009H)

(R/W)

bit 3

bit 2

bit 1

bit 0

Port 9 input/output data

• Port A

PA3

PA2

PA1

PA0

PAD (00AH)

(R/W)

bit 3

bit 2

bit 1

bit 0

Port A input/output data

!

Note:

*: Bits P83 and P82 have to be set to "1" or "0" before executing an external memory transfer

instruction (MOVXB) or carrying out voice synthesis.

The pins P8.3 and P8.2 are not present in the ML63326.

For details, see Chapter 11, "External Memory Transfer Function" and Chapter 13, "Voice
Synthesis."

(2) Port data registers (P8D, P9D, PAD)

The port 8 data register (P8D), the port 9 data register (P9D), and port A data register (PAD)
are 4-bit special function registers (SFRs) used to set the output values for the ports.

When port direction register (P8DIR, P9DIR, PADIR) bits are set to "1" and the output mode
selected, the contents of the port data registers are output to the ports.

When the output mode is selected and the port data register read, the contents of the data
register are read.

The port pin levels are read when the port data registers are read with the port direction
register bits set to "0" and the input mode selected.

• Port 8

• Port 9

P83*

P82*

P81

P80

P8D (008H)

(R/W)

bit 3

bit 2

bit 1

bit 0

Port 8 input/output data

Содержание ML63326



































































































































































































































































































































Отзывы:

Нет отзывов