ML620/ML621 User’s Guide
Setting Top of Form (TOF):
Notes:
Adjusting the TOF can be done in cut sheet or
continuous forms mode.
If necessary, print the menu settings to
determine where the current TOF is set.
The default TOF is set at 11/12” (23.28 mm).
With paper loaded and the printer on and selected:
Align the paper with the first print line position as
follows:
To set the TOF
lower
(the first line of print on
the page moves down), press and hold down
the
LOAD/EJECT
and
SEL
keys at the same
time.
To set the TOF
higher
(the first line of print on
the page moves up), press and hold down the
LOAD/EJECT
and
LF/FF
keys at the same time.
The paper moves in increments of 1/144”.
When you have the TOF set where you want it,
press and hold
SEL
, then press
LF/FF
to save the
new setting.
Note: To reset the Top of Form to the factory default,
see “Resetting Top of Form to the Factory
Default” later in this chapter.
1.
.