Oki Microline 182, Руководство по обслуживанию

Страница: 38 / 210

3.2.12 motor assembly
(1) Remove the upper cover (see 3.2.1).
(2) Remove the printer mechanism. (See 3.2.11 step 7. The control board
need not be
removed.)
(3) Remove two screws
(4) Remove motor assembly
For reassembly, reverse the disassembly procedure.
Notes:
DO
not touch the
@directly
it and make sure that if is clean.
2. Move the bias ge r to the platen gear as indicated by the arrow then engage
them at (The bias gear is differentiated by half of a tooth with respect
to the tooth of platen gear
When assembling the motor assembly loosen the screw fastening the
connection board and make a space between the base and connection board. Then
the motor pressing it against. and tighten the screw
fastening connection board.
4.
assembling, make sure that the platen gear is correctly engaged and the
platen turns smoothly.
3 - 2 4