Oki Microline 182, Руководство по обслуживанию

Страница: 28 / 210

3.2.7
Ribbon feed gear assembly
Remove the upper cover (see 3.2.1).
Remove ribbon cartridge by lifting both
Disengage the two front tabs and two rear tabs@ (total of four tabs). Then lift
upward by inserting small flat screwdriver to slots.
Remove ribbon feed gear assembly
Remove carriage cable cable holder and contact pressure rubber from
ribbon feed gear assembly
For reassembly, reverse the disassembly procedure.
Notes:
6
not touch the carriage cable and space motor assembly terminal (contact)
directly with hand and make sure that it is clean.
2.
3.
Make sure the carriage cab/e is not folded.
After installing ribbon feed gear assembly check and adjust the gap between the
platen and print head (see section
3 - 1 4