LD670 Instruction sheet
Unpacking the printer
Open the carton, and pull out the printer and its components.
Please confirm that the following things are enclosed
• Printer (1)
• Thermal Paper (1)
• CD (1)
• Instruction sheet (This paper) (1)
• Safety sheet (1)
• AC adaptor (1)
• Power cable (1)
Setting up
1.
Connecting Inter face Cable
Note 1: Refer to '3. Preparations' of the manual, except the Dual interface model.
Open the connector cover at the rear of the printer with lifting it , and connect the interface cable to its rear Connector socket.
Close the cover after connecting the ca
ble.
Note 2: If cables are arranged so that they extend from the rear or from the rear on the right side, remove the notch of the
connector cover or the cover with nippers or a similar tool. Otherwise, the cables may be damaged and it may cause
a failure.
For a unit with Dual interface
2.
Connecting the drawer kick cable
Open the connector cover at the rear of the printer by lifting it, and connect the drawer kick cable to its rear connector
socket.
Close the cover after connecting the cable.
Note 1: If the cable is arranged so that it extends from the rear, remove the notch of the connector cover with nippers or
a
similar tool. Otherwise, the cable may be damaged and it way cause a failure.
Note 2: The drawer kick cable must not be used for a purpose other than for control of the drawer.
3.
Connecting the AC Adapter
(1) Connect the AC adapter to the AC adapter power cable.
Note 1: To connect or disconnect the AC adapter, turn off the power switches of the printer and all the devices to be
connected to the printer. And, unplug the plug of the AC adapter power cable from the electrical outlet.
WARNING [Warning for Safety]
This printer must use the AC Adapter specified below. Otherwise, there may be dangers of fire and/or electrification
occurrence. Please be sure to use our company specifying AC Adapter below.
Part Number:KA02951-0120
Connector
Cover notch
Interface Connector
(USB Interface Type-B)
* Connect the printer to a PC
with this connector.
USB Interface Cable Type-B
* Connect the printer to a PC with
this connector.
Serial interface cable
* Secure the connector with
screws after making the
connection.
Notch
Power Connector
Drawer kick connector
Interface connector
(Serial interface)
Connector cover Notch
Drawer kick cable
