4
4-62 Performing Setup from the Printing Unit Control Panel
ES3640e MFP EFI Configuration Guide - 62
Accessing Setup options
To access Setup when the Fiery is Idle
1. With the printing unit in the ‘Ready’ state, press
the
or
keys
until the Admin Setup Menu is displayed, then press the ENTER
key.
2. If an administrator password has been set up you will be
prompted for it. Enter the correct administrator password and
press the ENTER key to gain access to the Setup menus.
Press the or keys to choose each character of the password
and press ENTER to advance to the next character. Pressing
ENTER after the last character completes password entry.
For first-time Setup, you must perform at least these Setups in
this order:
1 – Server Setup
2 – Network Setup
3 – Printer Setup
After the administrator password has been successfully entered if
necessary, these and other Setup menus can be accessed using
the or keys. Press the ENTER key to select the required
menu when its name is displayed.
After performing these Setups, you can continue with the
remaining Setups, or exit Setup and save your changes.
About the Control Panel Setup interface
When you perform Setup from the Control Panel, you select one
menu after another using the or keys and pressing ENTER to
select the required menu. In each menu enter information about
your Fiery and your network and printing environment.
