9 - English
7. Handling and storage
8. Exposure controls/personal protection
Control Parameters:
Individual Protection Measures:
9. Physical and chemical properties
Information on Basic Physical and Chemical Properties:
Precautions for Safe
Handling
:
Keep out of reach of children.
Avoid dust formation. Handle in adequately ventilated areas.
Do not breathe dust. Do not get in eyes or on skin.
Keep away from excessive heat and sources of ignition such as sparks and open flames.
Ensure all the equipment is electrically earthed/grounded before beginning operation.
Conditions for Safe
Storage, Including Any
Incompatibilities
:
Keep out of reach of children.
Keep container closed and store at room temperature.
Keep away from excessive heat and sources of ignition.
Do not store with strong oxidizers.
Specific End Uses
:
This product is a toner used in printers/copiers.
Product
USA OSHA PEL
ACGIH TLV
EU OEL
DFG MAK
toner
Total dust: 15mg/m3
Respirable fraction: 5mg/
m3
Inhalable particulate:
10mg/m3 Respirable
particulate: 3mg.m3
Not established
Inhalable fraction: 4mg/m3
Respirable fraction: 1.5mg/
m3
Ingredient(s)
USA OSHA PEL
ACGIH TLV
EU OEL
DFG MAK
Carbon black
3.5mg/m3
3.5mg/m3
Not established
Not established
Amorphous silica
20mppcf* or 80/%Sio2 mg/
m3 (* million particles per
cubic foot)
Not listed
Not established
Inhalable fraction: 4mg/m3
Titanium dioxide
Total dust: 15mg/m3
10mg/m3
Not established
Not established
Exposure Controls:
Engineering Controls
:
No special ventilation equipment needed under intended use of this product.
But, ventilation equipment is necessary in case of dust formation.
DNEL(s)
:
Not available.
PNEC(s)
:
Not available.
Eye/Face Protection
:
Not Required
Personal protective equipments (gloves) are recommended
when handling this product in large quantities.
Skin Protection
:
Not Required
Personal protective equipments (glasses) are recommended
when handling this product in large quantities.
Respiratory Protection
:
Not Required
Personal protective equipments (mask) are recommended
when handling this product in large quantities.
Appearance
:
Fine black powder.
Odor
:
None or slight plastic-like odor.
pH
:
Not applicable.
Melting Point/Freezing
Point (°C)
:
Not applicable.
