English
Chapter 2 - Windows Setup
15
1.
When the [Found New Hardware Wizard]
appears, click on [Next].
Note:
If the system has already been configured once,
the printer driver configures automatically and
the Found New Hardware Wizard is not
displayed. Please proceed to Step 9.
2.
Select [Search for the best driver for my device
(Recommended)] and click on [Next].
3.
Choose [Specify a location] and click on [Next].
4.
Insert the printer software CD-ROM into the CD-
ROM drive.
5.
Uncheck [Floppy disk drive] and check [CD-
ROM drive], then click on [Next] to install by
default the PCL printer driver.
OR
To install another printer driver, uncheck both
[Floppy disk drive] and [CD-ROM drive] and
c h e c k [ S p e c i f y a l o c a t i o n ] . E n t e r
D:\DRIVERS\WIN2000\
Language
(where D:\ is
the drive letter of the CD-ROM), then click on
[Next] selecting the required printer driver.
6.
Confirm that the printer driver is ready to be
installed and click on [Next].
9000GBS.book Page 15 Wednesday, December 6, 2000 10:07 AM
