English
Chapter 1 - Printer Setup
7
2.
Open the top cover.
3.
Remove the LED head restrainer (1) from behind
the LED heads in the top cover.
4.
Remove the orange transport lock (2) from
behind the coloured lever (3) on top of the fuser
unit.
Note:
To ease removal of the transport lock, it may be
necessary to move the coloured lever (3)
slightly. The coloured lever will return to its
original position under spring loading after it
has been released.
CAUTION:
Never expose image drums to light for more than 5
minutes. Never expose image drums to direct sunlight.
Always hold image drums by the ends. Never touch the
surface of the green drum inside the image drum.
5.
Remove the four image drums and place them on
a level surface.
6.
Remove the protective sheets (1) from each of the
four image drums.
7.
Push the tab (2) inwards and remove the blanking
plate (3) from each of the image drums.
9000GBS.book Page 7 Wednesday, December 6, 2000 10:07 AM
