4
Network Install: Hardware
Connect to the Network Port
Note:
No Ethernet
®
cable is supplied with the printer. Use an Ethernet cable
with two twisted wire pairs and an RJ45 plug.
□
Turn the printer off.
□
Remove the plug from the Ethernet port (
1
), then connect your Ethernet cable to the port.
□
Connect the other end of the cable to the network port.
□
Turn the printer on and wait for the print server’s STATUS light (
2
) to stop blinking.
□
Press the TEST button (
3
) on the print server. The
Network Information
configuration sheets print.
Keep these sheets handy: they contain information you need to set up the printer on your network.
