Oki C3520, Сетевое руководство, Страница: 25 / 34

Windows> 25
3. Select “Local printer attached to this computer” and
ensure that the “Automatically detect and install my Plug
and Play printer” check box is not selected. Click
Next .
4. Select “Create a New Port” and change “Type of Port:” to
“Standard TCP/IP Port”.
5. Click Next . The “Add Standard TCP/IP Printer Port Wizard”
is displayed.
6. Click Next and enter the host name or IP address for the
printer, for example, ‘ 192.168.1.31 ’. If the above IP
address is entered, the Port Name will default to
IP_192.168.1.31.
7. Click Next . “Additional Port Information Required” is
displayed.
8. Under “Device Type”, select Custom and click Settings .
9. Depending on whether you are installing the Windows
Standard TCP/IP Port using LPR or Port 9100, enter the
following details:
LPR
> Set “Protocol” to LPR.
> Under “LPR Settings”, enter Queue Name: ‘ lp ’ and ensure
that “SNMP Status Enabled” is not selected.
Port 9100
> Set “Protocol” to Raw.
> Ensure that the “Port Number” is 9100 and that “SNMP
Status Enabled” is not selected.
10. Click OK .
11. Click Next.
12. Click Finish and follow the instructions on the screen to
finish installing the printer.