Oki C3520, Сетевое руководство, Страница: 22 / 34

Windows> 22
Standard TCP/IP Port using LPR or Port 9100
NOTE:
In order to use Microsoft LPR, it must first be installed on your
system.
To install this port, proceed as follows:
1. Select Start -> Settings -> Control Panel.
2. Open the “Printers” folder.
3. Double-click Add Printer and then select Next .
4. Select Local Printer, clear the “Automatically detect my
printer” check box. Click
Next .
5. Select “Create a new port” and, under “Type of Port:”,
select “Standard TCP/IP Port”.
6. Click Next .
7. The “Add Standard TCP/IP Printer Port Wizard” is
displayed. Click
Next .
8. Click Next .
9. Under “Name or address of server providing LPD”, enter
the host name or IP address of your printer, for example,
‘
192.168.1.31’ . If the above IP address is entered, the
Port Name will default to IP_192.168.1.31.
10. Click Next . A message is displayed indicating that
additional port information will be required.
11. Under “Device Type”, select Custom and click Settings .
12. Depending on whether you are installing the Windows
Standard TCP/IP Port using LPR or Port 9100, enter the
following details:
LPR
> Ensure “Protocol” is set to LPR.
> Under “Name of printer or print queue on that server”
type ‘
lp ’.
Port 9100:
> Ensure “Protocol” is set to Raw.