6 - English
Regulatory Information
ENERGY STAR
®
: B6500dn and
B6500dtn Printers
As an ENERGY STAR Partner, Oki Data has
determined that the B6500dn and
B6500dtn models meet the ENERGY STAR
guidelines for energy efficiency. Look for
the ENERGY STAR logo on your printer.
Note:
B6500 and B6500n models do not meet ENERGY
STAR guidelines.
Year 2000 Compliance
This product is Year 2000 Compliant. It contains information
technology that accurately processes date and time data
between the years 1999 and 2000, and carries no issue for
the September 9, 1999 (9999) programming concern. This
product, when used in combination with products purchased
from other manufacturers, whose products properly exchange
data and time information, will accurately process the date
and time.
Laser Safety Compliance
Class 1 Laser Device and CDRH Compliance
This printer is certified as a Class 1 laser product under the
U.S. Department of Health and Human Services (DHHS)
Radiation Performance Standard according to the Radiation
Control for Health and Safety Act of 1968. This certification
indicates that the printer does not emit hazardous laser
radiation. Since radiation emitted inside the printer is
completely confined within the protective housings and
external covers, the laser beam cannot escape from the
machine during any phase of user operation.
The Center for Devices and Radiological Health (CDRH) of the
U.S. Food and Drug Administration implemented regulations
for laser products on August 1976. These regulations apply to
laser products marketed in the United States. The label on the
printer indicates compliance with the CDRH regulations and
must be attached to laser products marketed in the United
States.
Federal Communications Commission (FCC)
Declaration of Conformity
1. Product Identification
Product Name: B6500 Series
Model No.: JER-6 and JEB-6
2. Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
3. Responsible Party
Oki Data Americas, Inc.
2000 Bishops Gate Boulevard
Mt. Laurel, NJ 08054-4620
1-800-654-3282 (1-800-OKI-DATA)
FCC Radio Frequency Interference Statement
WARNING: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Plug the unit into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
Note:
It is the responsibility of the user to obtain the
required shielded cable in order to ensure compliance
of this equipment with FCC regulations.
Changes or modifications not expressly approved by Oki Data
may void your authority to operate this device.
Industry Canada (IC)
Radio Interference Statement
This Oki Data apparatus complies with the Class B limits for
radio interference as specified in the IC Radio Interference
Regulations.
European Union Council of the European
Communities
Statement of Electromagnetic Conformance
This product complies with the requirements of the council
Directive 89/336/EEC on the approximation of the laws of the
member states relating to electromagnetic compatibility.
Statement of Safety Conformance
This product is in conformity with Directive 73/23/EEC on the
harmonization of the laws of Member States relating to
electrical equipment designed for use within certain voltage
limits.
