Oki 8100e Скачать руководство пользователя

Страница: 104 / 106

Troubleshooting 104

Print Server mode

Check the File Server name set in the NIC and on the File Server are the
same.

Check the Printer name set in the File Server and the NetWare Port
name set in the NIC are the same. If there are multiple NICs, configure
the NetWare Port names to be different.

Check the NetWare login password is correct.

Check the Machine name is the same as the Print Server name set in
the File Server.

Printer does not print.

Check the network cable is correctly connected.

Change the cable and try again.

Turn the printer off and on again.

Check the NIC is connected to the File Server.

Check the printer driver has been mapped to the correct netware
queue.

PostScript error occurs if a Banner Page is printed.

A PostScript Banner page cannot be printed in NetWare 3.12 Remote
Printer mode. If a PostScript printer is used and a Banner Page is
printed,

PostScript error

is displayed. Turn the banner output

Off

the client’s printer settings.

EtherTalk

Not identified by the Chooser and the Setup Utility.

Turn the printer off and on again.

Check the network cable is correctly connected.

Change the cable and try again.

Содержание 8100e











































































































Результаты поиска

Содержание 8100e

Отзывы:

Похожие инструкции для 8100e

Бренды по названию

Популярные бренды

Oki 8100e, Руководство пользователя

Результаты поиска

Содержание 8100e

Отзывы:

Похожие инструкции для 8100e

Бренды по названию

Популярные бренды