Okay GBS 1018 LI, Руководство по эксплуатации

Страница: 25 / 48

GB | Operating Instruction
GB-9
Warning! The leading edges of the blades must be oiled
to ensure proper lubrication. If the leading edges are not
oiled, blade durability may be adversely affected.
If the cutting tools have become dull after long use
please replace them with original spare parts.
Clean the device using only a brush or cloth. Do never
wash down the device with water and do never dip the
device into water.
Apply protective spray to the blades after each use.
Replace blunt blades.
Always put on the blade guard after use.
Examine the tool for obvious defects and have it repaired
in an authorised service shop if required.
Storage
Always store the tool in a dry, clean place outside the
reach of children. Make sure that the place of storage
is frost-free.
Spare parts
If you need accessories or spare parts, please contact our
Service department.
When working with this tool, do not use any accessory
parts other than those recommended by our company.
Otherwise the operator or others in the vicinity could suffer
serious injuries, or the tool could be damaged.
The following information should be provided when
ordering spare parts:
• Type of machine
• Item number of the machine
Waste disposal and environmental protection
Please observe the following directions for
the disposal of your accumulator/battery.
Batteries are not to be put into the rubbish. As a
consumer you are legally obliged to return used
batteries and accumulators.
At the end of the duration of your apparatus, the
batteries or accumulators have to be taken from
the apparatus, disposing of them separately.
You have the possibility of delivering your old batter-
ies and accumulators to the local collecting points of
your municipality or to your dealer or to the distribution
centers.
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose
of the device together with your domestic refuse, but
dispose of it in an environmentally friendly manner.
Please dispose of the device itself at an according col-
lecting/recycling point. By doing so, plastic and metal
parts can be separated and recycled. Information con-
cerning the disposal of materials and devices are avail-
able from your local administration.
Warranty
For this electric tool, the company provides the end
user - independently from the retailer‘s obligations
resulting from the purchasing contract - with the following
warranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. For commercial use and
use for rent, the warranty period is reduced to 12 months.
Wearing parts, rechargeable batteries and defects
caused by the use of non fitting accessories, repair with
parts that are not original parts of the manufacturer, use
of force, strokes and breaking as well as mischievous
overloading of the motor are excluded from this warranty.
Warranty replacement does only include defective parts,
not complete devices. Warranty repair shall exclusively
be carried out by authorized service partners or by
the company‘s customer service. In the case of any
intervention of not authorized personnel, the warranty
will be held void.
All postage or delivery costs as well as any other
subsequent expenses will be borne by the customer.
Repair service
Repairs to electric power tools should only be carried out
by specialist electrical personel.
• Service:
Please contact your nearest Lagerhaus specialised
workshop.
You can find a Lagerhaus specialised workshop in your
vicinity in the Internet at „www.lagerhaus.at“.