Okay FGS 80-1 LI, Руководство по эксплуатации

Страница: 34 / 40

GB | Operating Instruction
32
- Hold the power tool properly, e.g. with
both hands on the handles, if two han-
dles are present.
Losing control of the
device can result in injuries.
• This product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge.
• This machine may cause serious injuries.
Please read the instruction manual care-
fully as to the correct handling, the prepa-
rations, the maintenance and the proper
use of the cutting tool. Familiarize yourself
with the machine before the first use and
also have yourself introduced to practical
use of the machine.
• The cutting tool continues to run after the
device is switched off.
• Turn off power before cleaning.
• Beware! Keep your fingers away from the
cutting area!
• Only switch on the device if your hands
and feet are away from the cutting tools.
• Remove all debris from the working area
before use and pay attention to such de-
bris while working!
• Turn the machine off before transporting
and wait until the blade stops moving. Main-
tenance and cleaning should be performed
only when the machine is turned off.
• Children and teenagers under 16 years of
age must never use this device!
• Never permit children or persons who are
not familiar with the operating instructions
to use this device.
• Statutory regulations can restrict the age
of the operator.
• Be aware of third persons in the work area.
• Use of the machine must be prevented is
people, especially children and house pets
are present.
• Only use the shear in daylight or suffi -
ciently bright artificial illumination.
• The clippers must be subjected to regular
maintenance and checks. Damaged blades
must be replaced as a pair. Professional
repair is required if damage occurs due
to impact.
• The machine should be inspected and
maintained regularly by a responsible re-
pair service only.
• Wear suitable working clothes, i.e. protec-
tive glasses, protective means for ears,
non-slippery shoes and working gloves.
Do not wear broad clothes which could be
caught by the moving parts.
• After you finish using the clippers and
before cleaning them, it is necessary to
ensure that the machine cannot be acci-
dentally turned on, such as by unlocking
the switch.
• Check the cutting unit regularly for damage
• Never hold the clippers by the blades, you
may run the risk of injury even when the
clippers are not moving!
• Never touch moving blades in an attempt
to remove debris or if the blades are
blocked. Always switch off the device.
• Keep the machine away from children and
store it in a safe place.
• When working with the shears, always take
a stabile standing position, particularly
when you are using steps or a ladder.
• Do not use shears with a damaged or ex-
cessively worn-out cutting part
• Ensure that all protective devices and han-
dles are installed on the machine. Never try
to put an incomplete machine in operation.
• Always use the protective part designed
for the blade when transporting and stor-
ing the shears.
• Before starting the work, make yourself fa-
miliar with the surroundings and possible
dangers which you may not hear because
of the noise.
• Only use the spare sparts and accessories
recommended by the manufacturer.
• Note that the user shall be responsible
himself for accidents and hazards that re-
sult to other people or their property.
• Prior to using the machine, inspect it visu-
ally for damaged, missing, or incorrectly
attached protective devices or coverings.
• Never use the machine with damaged cov-
erings or protective devices or without the
covering or protective devices.