13
EN
BEFORE FIRST TIME USE
During manufacturing, parts of the product (hotplate) are coated with a protective film for their
protection. To remove production residue, run the product on MAX setting for approx. 3 minutes without
pot/saucepan. Make sure there is sufficient ventilation as a slight odor and some smoke may occur. This
is normal and will disappear shortly.
TIPS FOR CHOOSING POTS/SAUCEPANS
1
Only use pots/saucepans with flat bottom to prevent damage to the hotplate.
2
Use pots/saucepans that has close to the same diameter as the hotplate to minimize the heat loss
and prevent hotplate being damaged as a result of uneven heat distribution.
OPERATION
3
Place the product on an even, stable and heat resistant surface.
4
Connect the power plug to a suitable power outlet.
5
Place a pot/saucepan on the hotplate.
Note: Ensure that the pot/saucepan is clean and dry on the outside. Do not turn on if there is no
pot/saucepan.
6
Turn the thermostat knob to the desired setting.
Setting
Function
0
OFF
MIN -1
Keeping warm
2
Simmering
3 - 4
Regular cooking
MAX
Parboiling and quick frying
7
The power indicator up while the hotplate is heating up. Once the pre-set level has been reached, it
will light off.
Note: The indicator light will lights up and off during use to keep the set heat level.
8
Turn the thermostat knob to 0 after use.
Warning: Always unplug the product to ensure it is completely turned off.
CLEANING AND CARE
Warning! When cleaning, never use solvents or abrasive materials, hard brushes, metallic or sharp
objects. Solvents are harmful to human health and can attack plastic parts, while abrasive cleaning
mechanisms and tools may scratch the surface(s).
9
Warning! Unplug the product and let it cool down completely before cleaning.
10
Never immerse electrical parts of the product in water during cleaning or operation.
11
Clean the product’s exterior surfaces with a slightly damp cloth and then dry them thoroughly.
Make sure that no water enters the product interior (for example, through the switch).
Note: Keep the product in a dry, cool location which is protected against moisture and direct
sunlight. Keep this product out of the reach of children.
IM_OSP113_ODP113_140728_V07_HR.indb 13
28/7/14 4:46 PM